User manual

Chapter 13 Specifications RIGOL
DG4000 User's Guide
13-7
60MHz
Burst Count 1 to 1 000 000 or Infinite
Start/Stop Phase 0° to 360°
Internal Period 2μs to 500s
Gated Source External Trigger
Trigger Source Internal, External or Manual
Trigger Delay 0ns to 85s
Sweep Characteristics
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Type Linear, Log or Step
Direction Up or Down
Start/Stop
Frequency
1μHz to 160MHz 1μHz to 100MHz 1μHz to 60MHz
Sweep Time 1ms to 300s
Hold/Return Time 0ms to 300s
Trigger Source Internal, External or Manual
Mark Falling edge of Sync signal (programmable)
Counter Specifications
Function Frequency, Period, Positive/Negative Pulse Width, Duty Cycle
Frequency
Resolution
7 digits/second (Gate Time =1s)
Frequency Range 1μHz to 200MHz
Period Measurement Measurement Range 5ns to 16 days
Voltage Range and Sensitivity (Not modulation signal)
DC Coupling
DC Offset Range ±1.5V
DC
Input
Attenuation:
"closed"
1μHz to 100MHz
50mVRMS to
±2.5Vac+dc
100MHz to 200MHz
100mVRMS to
±2.5Vac+dc
AC Coupling
1μHz to 100MHz
50mVRMS to
±2.5Vpp
100MHz to 200MHz
100mVRMS to
±2.5Vpp