User manual

RIGOL Chapter 10 Utility Functions and System Settings
DG4000 User's Guide
10-26
User-defined Waveform Key
User at the front panel of DG4000 provides a shortcut for users. You can define
this shortcut key as the desired built-in waveform or arbitrary waveform stored in
the internal memory of the instrument. You can recall the desired waveform under
any operation interface once you press this shortcut key.
To modify the waveform recalled by this shortcut key, press Utility  UserKey to
open the shortcut waveform defining interface. Select a type by pressing the menu
softkey at the right side of the screen; use the knob to select the desired waveform
(such as: AbsSine), use to open the 2/2 menu page and then press Select to
select the specified waveform.
Note: For arbitrary waveforms, you can only press User to recall the arbitrary
waveform selected after you specify the waveform only when arbitrary waveforms
are stored in the specified storage location of the internal memory of the
instrument.
Figure 10-5 Waveform Defining Interface
After that, pressing User under any interface would output the waveform selected
from the corresponding channel (if it is currently turned on) and you can also