User manual

RIGOL Chapter 10 Utility Functions and System Settings
DG4000 User's Guide
10-18
Beeper
When the beeper in DG4000 is turned, the beeper sounds when users operate the
front panel or when an error occurs during remote control.
Press Utility  System  Beeper to select "On" or "Off" and the default is "On".
The current setting is stored in non-volatile memory and will not be influenced by
"Preset".
Screen Saver
Enable or disable screen saver mode.
Press Utility  System  ScrnSvr to select "On" or "Off" and the default is
"Off". The current setting is stored in non-volatile memory and will not be
influenced by "Preset".
System Information
Press Utility  System  System Info and you can view the information (such
as the model, serial number and version number) of the instrument in the system
information interface.