User manual

Chapter 10 Utility Functions and System Settings RIGOL
DG4000 User's Guide
10-13
To Set the Domain Name Server (DNS)
In ManualIP mode, the DNS could be manually set.
 The DNS format is nnn.nnn.nnn.nnn, where the first nnn ranges from 1 to 223
(except 127) and the other three nnn range from 0 to 255. It is recommended
that users acquire an available DNS address from their network administrator.
 Press DNS Service and use the numeric keyboard and direction keys to enter
your desired DNS address. The setting is stored in non-volatile memory and
will be automatically loaded when the generator is powered on the next time if
DHCP and Auto IP are set as "Off".
Default Configuration
Press Default Config and the prompt message "Restore network settings to
preset values of LXI?" is displayed. Press OK to restore the network parameters to
their default values. By default, DHCP and Auto IP are enabled and Manual is
disabled.
Current Configuration
Press Current Config to examine the MAC address of the current instrument, the
current LAN parameters and LAN status information.
Apply
Press Apply and the current settings of the LAN parameters will take effect.