User manual

RIGOL Chapter 13 Specifications
DG4000 Series User’s Guide
13-4
Offset (into 50 Ω)
Range
± 5Vpk ac + dc
Accuracy
1% of setting + 5mV + 0.5% of amplitude
Waveform Output
Impedance
50Ω (Typical)
Protection
Short-circuit protection, automatically disable waveform output
when overload occurs
Modulation Characteristics
Modulation Type
AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, 3FSK, 4FSK, OSK, PWM
AM
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source
Internal/External
Modulating Waveform
Sine, Square, Ramp, Noise, Arb
Depth
0% to 120%
Modulating Frequency
2mHz to 50KHz
FM
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source
Internal/External
Modulating Waveform
Sine, Square, Ramp, Noise, Arb
Modulating Frequency
2mHz to 50KHz
PM
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source
Internal/External
Modulating Waveform
Sine, Square, Ramp, Noise, Arb
Phase Deviation
0° to 360°
Modulating Frequency
2mHz to 50KHz
ASK
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source
Internal/External
Modulating Waveform
Square with 50% duty cycle
Key Frequency
2mHz to 1MHz
FSK
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Source
Internal/External
Modulating Waveform
Square with 50% duty cycle