User manual

RIGOL Chapter 3 Arbitrary Waveform Output
DG4000 Series Users Guide
3-4
To Select Arbitrary Waveform
DG4000 allows users to select arbitrary waveforms stored in internal or external
memory for output. Press Arb, use to open the 2/2 menu page, and then press
Select Wform to select Builtin, Stored Wforms or Volatile Wform for arbitrary
waveform output.
Built-In Waveform
Select from the 150 kinds of built-in arbitrary waveforms of DG4000 as shown in
the table below. Press BuiltIn and select a kind (Common, Project, SectMod,
Bioelect, Medical, Standard, Maths, Trigonome, Anti Trigonome or
Window); the corresponding waveforms are displayed on the interface; use the
knob to select the desired waveform; use to open the 2/2 menu page and
press Select to select the specified waveform.
Table 3-1 Built-in Waveform Table
Name
Explanation
Common
DC
DC signal
AbsSine
Absolute value of a Sine
AbsSineHalf
Absolute value of half a Sine
AmpALT
Gain oscillation curve
AttALT
Attenuation oscillation curve
GaussPulse
Gauss pulse
NegRamp
Negative ramp
NPulse
Negative pulse
PPulse
Positive pulse
SineTra
Sine-Tra waveform
SineVer
Sine-Ver waveform
StairDn
Stair-down waveform
StairUD
Stair-up and stair-down waveform
StairUp
Stair-up waveform
Trapezia
Trapezoid waveform
Project