User manual

RIGOL Chapter 10 Utility and System Settings
DG4000 Series Users Guide
10-22
User-defined Waveform Key
The User key at the front panel of DG4000 provides a shortcut for users. You can
define this shortcut key as the desired built-in waveform. You can recall and set
the desired waveform under any operation interface once you press this shortcut
key.
Press Utility UserKey to open the user-defined waveform interface. Use the
knob to select the desired waveform (such as: AbsSine) from the interface, use
to open the 2/2 menu page and then press Select.
Figure 10-6 User-defined Waveform Interface
At this point, pressing User under any interface would output AbsSine signal from
the corresponding channel (if currently turned on) and you can also modify the
AbsSine signal parameters.