Instructions

Chapter 2 Front Panel Operations RIGOL
DG2000 User Guide 2-77
Figure 2-21 Filename Input Interface (Chinese)
Tap the desired character, and the selected character will be displayed in
the Pinyin input area. After inputting the Pinyin for a Chinese character, tap
the desired Chinese character in the Chinese character display area (if no
proper Chinese character exists, tap
or to page down to search for
the desired Chinese character). The selected Chinese character will be
displayed in the filename input area. Use the same method to input all the
Chinese characters of the filename. You can also tap
the delete the
unwanted characters in the Pinyin input area, and then delete the Chinese
character located ahead of the cursor in the filename input area.
4. To Save a File
After finishing inputting filename in the filename input interface, press "Ok", and
the generator will save the file with the specified filename to the currently
selected directory. Tap "Cancel" to cancel the save operation.
Read
1. To Select the Read Path
Selects Disk C or D (when inserted with a USB storage device) as the current
read path.
You can tap Disk C or D to enter the current directory. You can also use the Left
arrow key to locate the cursor to the left side of the user interface, and then
rotate the knob to select Disk C or D. Press down the knob to enter the current
directory.
2. To Select the File to be Read
In the selected path, tap or use the knob to select the file to be read.
For Disk C, only state file and arb file can be read. For Disk D, the state files, arb
waveform files, Csv files, and bitmap files can be read. Note: the bitmap file can
Filename Input Area Pinyin Input Area Chinese Character Display Area