Instructions
RIGOL  Chapter 2 Command System 
2-102  DG2000 Programming Guide 
Mod/Trig/FSK] connector. Positive signal level corresponds to frequency increase, and negative 
signal level corresponds to frequency decrease. Lower signal levels produce less deviation. For 
example, if the frequency deviation is set to 1 kHz, +5 V signal level corresponds to a 1 kHz increase in 
frequency and -5 V signal level corresponds to a 1 kHz decrease in frequency. 
Return Format 
The query returns the frequency deviation in scientific notation, with 7 effective digits. For example, 
1.000000E+02 (the frequency deviation is 100 Hz). 
Example   
:SOUR1:FM 100        /*Sets the FM frequency deviation of CH1 to 100 Hz.*/ 
:SOUR1:FM? /*Queries the FM frequency deviation of CH1 and the query returns 1.000000E+02.*/ 
[:SOURce[<n>]][:MOD]:FM:INTernal:FREQuency 
Syntax 
[:SOURce[<n>]][:MOD]:FM:INTernal:FREQuency {<frequency>|MINimum|MAXimum} 
[:SOURce[<n>]][:MOD]:FM:INTernal:FREQuency? [MINimum|MAXimum] 
Description 
Sets the FM modulation frequency of the specified channel. 
Queries the FM modulation frequency of the specified channel. 
Parameter 
Name 
Type 
Range 
Default 
[<n>] 
Discrete 
1|2 
1 
<frequency> 
Real 
2 mHz to 1 MHz 
100 Hz 
Remarks   
  This command is only applicable to the internal modulation source 
(
[:SOURce[<n>]][:MOD]:FM:SOURce). 
  When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default. 
Return Format 
The query returns the FM modulation frequency in scientific notation, with 7 effective digits. For example, 
1.500000E+02 (the FM modulation frequency is 150 Hz). 
Example 
:SOUR1:FM:INT:FREQ 150    /*Sets the FM modulation frequency of CH1 to 150 Hz.*/ 
:SOUR1:FM:INT:FREQ? /*Queries the FM modulation frequency of CH1 and the query returns 
1.500000E+02.*/ 
[:SOURce[<n>]][:MOD]:FM:INTernal:FUNCtion 
Syntax   
[:SOURce[<n>]][:MOD]:FM:INTernal:FUNCtion {SINusoid|SQUare|TRIangle|RAMP|NRAMp|NOISe|USER} 
[:SOURce[<n>]][:MOD]:FM:INTernal:FUNCtion? 
Description 
Sets the FM modulation waveform of the specified channel. 
Queries the FM modulation waveform of the specified channel. 










