User Manual

RIGOL

User’s Guide for DG2000 Series

2-59

Table 2-26 The Menu Expanations of Utility System Setting

Function

Settings Explanation

On Set the output waveform as DC

DC On/

Off

Off Set the output waveform as Arbitrary.

Activate the Sync Signal of the [Sync]

Connector on the front panel.

Sync On/

Off

Deactivate the Sync Signal of the [Sync]

Connector on the front panel.

Output Set the Output parameter (Table 2-27)

I/O Set the I/O (Table 2-28)

System Set the System Configuration (Table 2-33)

Tes t /Cal

Test and Calibrate the instrument (Table

2-37)

Instruction

Sync Switch Setting：

When the amplitude is low relatively, you can reduce the distortion of the output

signal by prohibiting the Sync Signal. And the current storage is in the Non-Volatile

Memory.