User`s guide

RIGOL

User’s Guide for DG10× 2 Series

2-72

2. Info

The information includes: Model Number, Series Number, start-up times,

Calibration times and software version.

3. Password

This function is used to prevent unauthorized or accidental calibration to the

generator. When the generator is firstly shipped to the user, it is secured. You

have to unlock it before calibrating the instrument.

Press Utility  Test/Cal  PassWd, and enter the right password. The system will

display “The System is now unsecured”. SecOff will appear, see Figure 2-92, The

default password is “12345”. It is stored in the Non-Volatile Memory, and will not

change when the instrument is powered off or the Remote I/O is reset.

Figure 2-79

Input the Calibration PassWord

4. Calibration

Through the Info menu, users can get to know how many times did the Generator

have been performed the calibration. Please note that the generator has been

calibrated before it leaved the factory. When you turn on a new instrument, the

default number of the calibration is 0.