User`s guide

RIGOL

User’s Guide for DG10× 2 Series

3. To Set the Trig Level

The trig level (-3V～+3V) is divided into 1000 (00.0~99.9) shares, each “0.1” is 6

mV, it means the adjustment interval is 6 mV. For example, the input is “62.0”,

then the trig level is: -3V + (62.0 / 0.1) × 6 mV=0.72V.

(1) Press Utility  Count  Setup  TrigLev to set the trig level.

The trig level display on the screen is the default value when power on or the

value set at the last time. If the current value is effective, it could be use

immediately.

(2) Input the required trig level.

Use the knob to change the value as shown in the following figure, the counter

will immediately adjust the trig level, and trigger according to the specified value.

Figure 2-65

To set the trig level

NOTE: In DC coupling mode, users need to adjust the trig level manually.