User`s guide

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG10× 2 Series
V
 Abundant modulation function, various modulated waveform: AM, FM, PM and
FSK.
 Linear, logarithm Sweep and Burst mode.
 Abundant I/O: External Modulation Source, External 10 MHz Reference Input,
External trigger source, waveform output, synchronous signal output.
 Support USB flash drive. Could store and read waveform configure parameters or
the edited arbitrary waveform with USB flash drive, System Updating could also
be performed by using USB flash drive.
 Standard interface: USB Host & Device.
 Graph interface which shows the signal setting directly.
 Multilanguage user interface.
 Embedded Chinese/English Help System.
 Support Chinese/English Input.
NOTE:
All the descriptions in this guide are according to DG1022, if you need to know the
particular specifications about DG1012, please look over “ Chapter 5 Specifications ”.