User`s guide

RIGOL
© 2008 RIGOL Technologies, Inc. 2-25
User’s Guide for DG10× 2 Series
4. Save the Waveform to the Non-Volatile Memory
Press Arb  Edit  Create  EditPt  Save, enter the following interface. Select
the desired location (ARB1~ARB10) used to save, which will be displayed in
inverse color and press Store to save it to the specific place.
Figure 2-31
Operation Menu
Instruction
To save the Arbitrary Waveform：
In the Non-volatile Memory, each waveform storage place can only save one
waveform. If a new one is stored, the old one will be erased.
After the storage, press Recall to read the waveform to volatile memory. Press View,
the edited waveform is shown in the following figure.
Figure 2-32
Waveform under the Graph Mode
Default Arbitrary
Waveform