User`s guide

RIGOL

User’s Guide for DG10× 2 Series

To Select Arbitrary Waveform

There are 48 built-in Arbitrary Waveforms and 10 Non-Volatile memories for storing

the user-defined Arbitrary Waveforms in the Generator.

Press Arb  Load, enter the interface shown below.

Figure 2-20 Operation Menu

Table 2-7 Selection Menu for Built-in Arbitrary Waveform

Instructions:

 When there is no waveform stored in the Non-Volatile Memory, the

Stored Menu and the Delete Menu will hide.

 When there is no waveform in the Volatile Memory, the Volatile menu will

hide.

Settings

Explanation

Builtin

Select one of the five built-in Arbitrary Waveforms

(See Table 2-8)

Stored

Select one of Arbitrary Waveforms stored in the

Non-volatile memory.

Volatile

Select one of Arbitrary Waveforms stored in the

Volatile memory. When a new waveform is

created, the old one will be erased.

Delete

Delete one of the Arbitrary Waveforms stored in

the Non-volatile memory. The five Built-in

Waveforms can not be deleted.

Cancel the current operation, and return to the

upper menu. (The rest are the same and will not

be covered)