User`s guide

RIGOL
© 2008 RIGOL Technologies, Inc. 2-1
User’s Guide for DG10× 2 Series
Chapter 2 Operating Your Generator
By now you have got a brief understanding of DG10× 2 series with the front/rear panel,
every function control area and keys.
This chapter covers the following topics:
To Set Basic Waveforms 2-2
To Set Sine Waveform 2-2
To Set Square Waveform 2-7
To Set Ramp Waveform 2-10
To Set Pulse Waveform 2-12
To Set Noise Waveform 2-15
To Set Arbitrary Waveforms 2-16
To Select Arbitrary Waveform 2-17
To Edit Arbitrary Waveform 2-21
To Set Modulated Waveforms 2-27
To Set AM Waveform 2-28
To Set FM Waveform 2-30
To Set FSK Waveform 2-32
To Set PM Waveform 2-34
To Generate Sweep Signal 2-36
To Generate Burst Signal 2-38
To Store and Recall 2-42
To Set the Utility Function 2-49
To Set the Sync Output 2-52
Basic Setting of the Two Channels 2-54
Channel Coupling Settings 2-57
To Set the Counter 2-59
System Settings 2-63
I/O Settings 2-70
Test/Cal Settings 2-71
To Use the Help System 2-73