User`s guide

RIGOL

User’s Guide for DG10× 2 Series

1-15

To Use Store/Utility/Help Function

As shown in Figure 1-22, there are three buttons on the operation panel, which are

used to call the store/recall, utility and help function. The instruction below will help

you to be familiar with these Functions.

Figure 1-22

Store/Recall, Utility and Help Button

1. The Store/Recall Button is used to store waveform data and configure

information.

2. The Utility Button is used to set the auxiliary system function, change the output

configure parameters, interface setting, system setting information or perform the

instrument self-test and read the calibration information, etc.

3. The Help Button is used to read the help information.

Operation Instruction

To get help：

Press the key and last 2~3 second, then the help message will appear.