User`s guide

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG10× 2 Series
1-14
To Use Digital Input
As shown in Figure 1-21, there are two groups of buttons on the operation panel,
which are direction button, the knob and the keypad. The instruction below will help
you to be familiar with the Digital Input Function.
(1) Direction Key and the Knob (2) Keyboard
Figure 1-21
Front Panel Digital Input
1. Use the Direction keys to move the cursor left or right. Rotate the knob to change
a digit (clockwise to increase).
2. Use the Keypad to set the parameters values of the waveforms, which can change
its value directly.