User`s guide

RIGOL
© 2008 RIGOL Technologies, Inc. 5-3
User’s Guide for DG10× 2 Series
DC-1MHz
-55dBc
-45dBc
-55dBc
-45dBc
1MHz-5MHz
-55dBc
-40dBc
-55dBc
-40dBc
5MHz-20MHz
-50dBc
-35dBc
-45dBc
-35dBc
Total Harmonic
Distortion
DC to 20 kHz,1Vpp <0.2%
Spurious
(non-harmonic)
DC to 1 MHz < -70 dBc
1 MHz to 10 MHz < -70 dBc + 6 dB/octave
Phase Noise
10kHz Offset –115 dBc / Hz (Typical)
Square Wave
Rise/Fall Time
< 20 ns (10% to 90%), (Typical, 1kHz 1 VPP)
Overshoot
< 5% (Typical, 1kHz 1Vpp)
Duty Cycle
1µHz to 3MHz
20% to 80%
3MHz(not contain) to 4MHz
40% to 60%
4MHz (not contain) to 5MHz
50%
Asymmetry
(below 50% Duty
Cycle)
1% of period+ 20ns (Typical, 1kHz 1 VPP)
Jitter
6ns + 0.1% of period (Typical, 1kHz 1 VPP)
Ramp Wave
Linearity
< 0.1% of peak output (typical, 1KHz, 1 VPP, 100%
Symmetry)
Symmetry
0% to 100%
Pulse Wave
Pulse Width
2000s max period; 20ns min period; 1ns resolution
Overshoot
< 5%
Jitter
6ns + 100ppm of period
Arb Wave
CH1
CH2
Waveform Length
4k points
1k points
Amplitude Accuracy
14 bits (including sign)
10 bits (including sign)
Sample Rate
100MSa/s
100MSa/s