User`s guide

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG10× 2 Series
4-13
When “DC” is selected in Arb, the DC offset upper limit is 10V. If the specified
offset is higher than 10V, the system will adjust the DC offset to 10V
automatically.
77. Offset lower limit=-10V
When “DC” is selected in Arb, the DC offset lower limit is -10V. If the specified
offset is lower than -10V, the system will adjust the DC offset to -10V
automatically.
78. Load impedance upper limit=10kΩ
When DC output is off, the Load Impedance upper limit is 10kΩ. If the specified
Load Impedance is greater than 10kΩ, the system will adjust the Load
Impedance to 10kΩ automatically.
79. Load impedance lower limit=1Ω
When DC output is off, the Load Impedance lower limit is 1Ω. If the specified
Load Impedance is less than 1Ω, the system will adjust the Load Impedance to
1Ω automatically.
80. Start Phase upper limit=+360°
When DC output is off, the Start Phase upper limit is 360°. If the specified phase
is greater than 360°, the system will adjust the Start Phase to 360° automatically.
81. Start Phase lower limit=-360°
When DC output is off, the Start Phase lower limit is -360°. If the specified phase
is less than -360°, the system will adjust the Start Phase to -360° automatically.
82. The biggest light level is 31!
The biggest light level is 31. If the specified light level is greater than 31, the
system will adjust the light level to 31 automatically.
83. The smallest light level is 0!
The smallest light level is 0. If the specified light level is less than 0, the system
will adjust the light level to 0 automatically.
84. The biggest contrast level is 31!
The biggest contrast level is 31. If the specified contrast level is greater than 31,
the system will adjust the contrast level to 31 automatically.
85. The smallest contrast level is 0!
The smallest contrast level is 0. If the specified contrast level is less than 0, the
system will adjust the contrast level to 0 automatically.