User`s guide

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG10× 2 Series
4-9
35. FM Frequency lower limit=2mHz
In internal FM, the FM frequency lower limit is 2mHz. If the specified value is
lower than 2mHz, the system will adjust the FM Frequency to 2mHz automatically.
36. Hop Frequency upper limit=20MHz
In external FSK, Hop Frequency upper limit is 20 MHz. If the specified value is
higher than 20 MHz, the system will adjust the Hop Frequency to 20MHz
automatically.
37. Hop Frequency lower limit=1μHz
In external FSK, Hop Frequency lower limit is 1μHz. If the specified value is lower
than 1μHz, the system will adjust the Hop Frequency to 1μHz automatically.
38. Hop Frequency upper limit=20MHz
In internal FSK, Hop Frequency upper limit is 20MHz. If the specified value is
higher than 20MHz, the system will adjust the Hop Frequency to 20MHz
automatically.
39. Hop Frequency lower limit=1μHz
In internal FSK, Hop Frequency lower limit is 1μHz. If the specified value is lower
than 1μHz, the system will adjust the Hop Frequency to 1μHz automatically.
40. FSK Rate upper limit=50kHz
In internal FSK, the FSK Rate upper limit is 50 kHz. If the specified FSK Rate is
greater than 50kHz, the system will adjust the FSK Rate to 50kHz automatically.
41. FSK Rate lower limit=1μHz
In internal FSK, the FSK Rate lower limit is 1μHz. If the specified FSK Rate is less
than 1μHz, the system will adjust the FSK Rate to 1μHz automatically.
42. Phase Deviation upper limit=360.0°
In external PM, the Phase deviation upper limit is 360
o
. If the specified Phase
deviation is greater than 360
o
, the system will adjust the Phase deviation to 360
o
automatically.
43. Phase Deviation lower limit=0.0°
In external PM, the Phase deviation lower limit is 0
o
. If the specified Phase
deviation is less than 0
o
, the system will adjust the Phase deviation to 0
o
automatically.
44. Phase Deviation upper limit=360.0°
In internal PM, the Phase deviation upper limit is 360
o
. If the specified Phase
deviation is greater than 360
o
, the system will adjust the Phase deviation to 360
o
automatically.