User`s guide

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG10× 2 Series
3-6
Example 5: Output a Noise Waveform
How to generate a Noise waveform with 30mVPP Amplitude and 10mVDC Offset.
The operation steps:
1. Set the Amplitude.
(1) Press Ampl/ HiLev  Ampl which will display in reverse color.
(2) Enter “30” from the keypad and choose the unit “mvpp” to set the Amplitude as
30mVPP.
2. Set the Offset.
(1) Press Offset/ LoLev  Offset which will display in reverse color.
(2) Enter “10” from the keypad and choose the unit “mVDC” to set the Offset as
10mVDC.
After finishing the above settings, press View, the generated waveform is shown in
Figure 3-5.
Figure 3-5
Noise Waveform Output