Specifications

DG10X2 Commands System RIGOL
Programming Guide for DG10X2
2-61
COUPling
COUPling commands are used for channel coupling or copying.
DG10X2 supports following COUPling commands:
1. COUPling
2. COUPling?
3. COUPling:BASEdchannel
4. COUPling:BASEdchannel?
5. COUPling:PHASEDEViation
6. COUPling:PHASEDEViation?
7. COUPling:FREQDEViation
8. COUPling:FREQDEViation?
9. COUPling:CHANNCopy
The detailed information of each command are:
1. COUPling
Command
Format
COUPling {OFF|ON}
Function
Enable or disable coupling function.
Example
COUP OFF
2. COUPling?
Command
Format
COUPling?
Function
Query the coupling state.
Return Value
The query returns OFF or ON.
3. COUPling:BASEdchannel
Command
Format
COUPling:BASEdchannel{:CH1|:CH2}
Function
Select the base channel while coupling channels.
Example
COUP:BASE:CH1
4. COUPling:BASEdchannel?