Specifications

DG10X2 Commands System RIGOL
Programming Guide for DG10X2
2-53
MEMory
The generator has 10 storage locations in non-volatile memory (STATE1~ STATE10) to
store instrument states. The locations are numbered from 0 to 10. The generator
automatically uses location “0” to hold the state of the instrument when power down.
You can also assign a user-defined name to each of the locations (1 through 10) from
the front panel.
DG10X2 supports following MEMory commands:
1. MEMory:STATe:NAME
2. MEMory:STATe:NAME?
3. MEMory:STATe:DELete
4. MEMory:STATe:RECall:AUTO
5. MEMory:STATe:RECall:AUTO?
6. MEMory:STATe:VALid?
7. MEMory:NSTates?
The detailed information of each command are:
1. MEMory:STATe:NAME
Command
Format
MEMory:STATe:NAME {0|1|2|3|4|5|6|7|8|9|10} [,<name>]
Function
Assign an user-defined name for specified memory location.
Example
MEM:STAT:NAME 1,A1
2. MEMory:STATe:NAME?
Command
Format
MEMory:STATe:NAME? {0|1|2|3|4|5|6|7|8|9|10}
Function
Query the name of specified memory location.
Return Value
The query returns the name of specified memory location such as
A1. If no name was assigned, the return is empty.
3. MEMory:STATe:DELete
Command
Format
MEMory:STATe:DELete {0|1|2|3|4|5|6|7|8|9|10}
Function
Delete the contents in specified memory location.