Specifications

DG10X2 Commands System RIGOL
Programming Guide for DG10X2
2-47
Format
Function
Query the burst mode.
Return Value
The query returns TRIG or GAT.
3. BURSt:NCYCles
Command
Format
BURSt:NCYCles {<cycle>|INFinity|MINimum|MAXimum}
Function
Set the cycle number of burst (only used in TRIG mode).
Explanations
 <cycle> is the cycle number for user to set.
 MIN=1 cycle, MAX=50,000 cycles, INF is infinite number of
cycles.
Example
BURS:NCYC 100
4. BURSt:NCYCles?
Command
Format
BURSt:NCYCles?
Function
Query the cycle number of burst.
Return Value
The query returns the burst counting in the form of scientific
notation such as 1.000000e+02 or returns “Infinite”.
5. BURSt:INTernal:PERiod
Command
Format
BURSt:INTernal:PERiod {< >|MINimum|MAXimum}
Function
Set the period of burst in internal trigger mode.
Explanations
 <second> is the burst period for user to set, the unit is s.
 MIN=1μs, MAX=500s.
Example
BURS:INT:PER 10
6. BURSt:INTernal:PERiod?
Command
Format
BURSt:INTernal:PERiod? [MINimum|MAXimum]
Function
Query the period of burst in internal trigger mode.
Return Value
The query returns the burst period in the form of scientific notation
such as: 1.000000e+01.
7. BURSt:PHASe
Command
BURSt:PHASe {<angle>|MINimum|MAXimum}