Specifications

DG10X2 Commands System RIGOL
Programming Guide for DG10X2
2-45
Explanations
This command could be used only when OUTPut:TRIGger is
enabled.
Example
TRIG:SLOP POS
4. TRIGger:SLOPe?
Command
Format
TRIGger:SLOPe?
Function
Query the edge of trigger signal that has been selected.
Return Value
The query returns POSITIVE or NEGATIVE.
5. TRIGger:DELay
Command
Format
TRIGger:DELay {<second>|MINimum|MAXimum}
Function
Set the trigger delay in seconds. Note: this command is only
applied to Burst mode.
Example
TRIG:DEL 0.000005
6. TRIGger:DELay?
Command
Format
TRIGger:DELay?
Function
Query the trigger delay.
Return Value
The query returns the selected delay time in the form of scientific
notation in seconds, such as: 5.000000e-06.