Specifications

DG10X2 Commands System RIGOL
Programming Guide for DG10X2
2-43
Function
Set the sweep time expected from the start frequency to the stop
frequency, the default time is 1 s.
Explanations
<seconds> is the sweep time, the unit is s.
MIN=1ms, MAX 500s
Example
SWE:TIME 10
4. SWEep:TIME?
Command
Format
SWEep:TIME?
Function
Query the sweep time expected from the start frequency to the
stop frequency.
Return Value
The query returns the sweep time in the form of scientific notation
in seconds such as: 1.000000e+01.
5. SWEep:STATe
Command
Format
SWEep:STATe {OFF|ON}
Function
Disable or enable the sweep mode.
Example
SWE:STAT OFF
6. SWEep:STATe?
Command
Format
SWEep:STATe?
Function
Query the sweep state.
Return Value
The query returns OFF or ON.