Specifications

RIGOL DG10X2 Commands System
Programming Guide for DG10X2
2-40
3. FSK:FREQuency
Command
Format
FSK:FREQuency {<frequency>|MINimum|MAXimum}
Function
Set the hop frequency of FSK in Hz.
Example
FSK:FREQ 10
4. FSK:FREQuency?
Command
Format
FSK:FREQuency?
Function
Query the frequency hopping rate of FSK.
Return Value
The query returns the frequency hopping rate of FSK in the form of
scientific notation, such as: 1.000000e+01.
5. FSK:INTernal:RATE
Command
Format
FSK:INTernal:RATE {<rate>|MINimum|MAXimum}
Function
Set the rate at which the output frequency “shifts” between the
carrier and frequency hop, the unit is Hz.
Explanations
Rate range: 2mHz 50kHz
Example
FSK:INT:RATE 100
6. FSK:INTernal:RATE?
Command
Format
FSK:INTernal:RATE?
Function
Query the rate of FSK.
Return Value
The query returns the rate of FSK in the form of scientific notation,
such as: 1.000000e+02.
7. FSK:STATe
Command
Format
FSK:STATe {OFF|ON}
Function
Disable or enable FSK function.
Example
FSK:STAT OFF
8. FSK:STATe?
Command
FSK:STATe?