Specifications

RIGOL DG10X2 Commands System
Programming Guide for DG10X2
2-36
PM
In PM, the phase of carrier is varies with the instantaneous voltage of the modulation
waveform. Among CH1, the generator can generate PM modulation waves. In addition,
PM commands could be used for these settings: modulation source, modulation
waveform, modulation frequency, phase deviation and PM modulation state.
DG10X2 supports following PM commands:
1. PM:SOURce
2. PM:SOURce?
3. PM:INTernal:FUNCtion
4. PM:INTernal:FUNCtion?
5. PM:INTernal:FREQuency
6. PM:INTernal:FREQuency?
7. PM:DEViation
8. PM:DEViation?
9. PM:STATe
10. PM:STATe?
The detailed information of each command are:
1. PM:SOURce
Command
Format
PM:SOURce {INTernal|EXTernal}
Function
Select internal or external modulation source, the default is INT.
Example
PM:SOUR EXT
2. PM:SOURce?
Command
Format
PM:SOURce?
Function
Query the modulation source of PM.
Return Value
The query returns INT or EXT.
3. PM:INTernal:FUNCtion
Command
Format
PM:INTernal:FUNCtion
{SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER}