Specifications

RIGOL DG10X2 Commands System
Programming Guide for DG10X2
2-34
Format
{SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER}
Function
Select the internal modulation wave of FM.
Explanations
In internal modulation source mode, the modulation wave could be
sine, square, ramp, negative ramp, triangle, noise or arbitrary
wave, the default is sine.
Example
FM:INT:FUNC SQU
4. FM:INTernal:FUNCtion?
Command
Format
FM:INTernal:FUNCtion?
Function
Query the internal modulation wave of FM that has been selected.
Return Value
The query returns SIN, SQU, RAMP, NRAM, TRI, NOIS or USER.
5. FM:INTernal:FREQuency
Command
Format
FM:INTernal:FREQuency {<frequency>|MINimum|MAXimum}
Function
Set the frequency of internal modulation of FM in Hz.
Explanations
Frequency range: 2mHz 20kHz
Example
FM:INT:FREQ 200
6. FM:INTernal:FREQuency?
Command
Format
FM:INTernal:FREQuency?
Function
Query the frequency of internal modulation of FM.
Return Value
The query returns the percent of the frequency of FM internal
modulation in the form of scientific notation, such as:
2.000000e+02
7. FM:DEViation
Command
Format
FM:DEViation{<frequency deviation of peak value>
|MINimum|MAXimum}
Function
Set the frequency deviation of peak value of FM in Hz.
Example
FM:DEV 100
8. FM:DEViation?
Command
Format
FM:DEViation? [MINimum|MAXimum]