Specifications

RIGOL DG10X2 Commands System
Programming Guide for DG10X2
2-30
AM
In AM, the amplitude of carrier is varies with the instantaneous voltage of the
modulation waveform. Among CH1, the generator can generate AM modulation waves.
In addition, AM commands could be used for these settings: modulation source,
modulation waveform, modulation frequency, modulation depth and AM modulation
state.
DG10X2 supports following AM commands:
1. AM:SOURce
2. AM:SOURce?
3. AM:INTernal:FUNCtion
4. AM:INTernal:FUNCtion?
5. AM:INTernal:FREQuency
6. AM:INTernal:FREQuency?
7. AM:DEPTh
8. AM:DEPTh?
9. AM:STATe
10. AM:STATe?
The detailed information of each command are:
1. AM:SOURce
Command
Format
AM:SOURce {INTernal|EXTernal}
Function
Select internal or external modulation source, the default is INT.
Example
AM:SOUR EXT
2. AM:SOURce?
Command
Format
AM:SOURce?
Function
Query the modulation source of AM.
Return Value
The query returns INT or EXT.
3. AM:INTernal:FUNCtion
Command
AM:INTernal:FUNCtion