Specifications

RIGOL DG10X2 Commands System
Programming Guide for DG10X2
2-20
amplitude for the selected function.
Example
VPP, VRMS or DBM. Note that DBM could be used only in non-high
resistance. The unit of voltage could be changed via sending
VOLTage:UNIT:CH2.
Command
Format
VOLT:CH2 MIN
12. VOLTage:CH2?
Command
Format
VOLTage:CH2?
Function
Query the amplitude of CH2.
Return Value
The query returns the amplitude that has been set in the form of
scientific notation such as: CH2: 4.000000e-03.
13. VOLTage:HIGH:CH2
Command
Format
VOLTage:HIGH:CH2 {<voltage>|MINimum|MAXimum}
Function
Set the high level of waves from CH2 in Vpp.
Explanations
<voltage>is the high level for user to set. MIN selects the
minimum high level. MAX selects the maximum high level.
Example
VOLT:HIGH:CH2 MAX
14. VOLTage:HIGH:CH2?
Command
Format
VOLTage:HIGH:CH2?
Function
Query the high level of waves from CH2.
Return Value
The query returns the high leve that has been set in the form of
scientific notation such as: 1.500000e+00.
15. VOLTage:LOW:CH2
Command
Format
VOLTage:LOW:CH2 {<voltage>|MINimum|MAXimum}
Function
Set the low level of waves from CH2 in Vpp.
Explanations
<voltage>is the low level for user to set. MIN selects the minimum
low level. MAX selects the maximum low level.
Example
VOLT:LOW:CH2 MIN