Specifications

RIGOL DG10X2 Commands System

Programming Guide for DG10X2

2-8

impression on this command, a value or “DEFault” must be

specified.

 If the parameters you set are less than three, the sequence

would be: <frequency>, <amplitude>, <offset>.

 The default units of <frequency>, <amplitude>, <offset> are:

Hz, Vpp, V

Example

APPL:DC:CH2 DEF,DEF,1.5

15. APPLy:USER:CH2

Command

Format

APPLy:USER:CH2 [<frequency>[,<amplitude>[,<offset>]]]

Function

Generate an arbitrary wave selected by FUNCtion:USER:CH2

command with specific frequency, amplitude and DC offset.

Explanations

 If the parameters you set are less than three, the sequence

would be: <frequency>, <amplitude>, <offset>.

 The default units of <frequency>, <amplitude>, <offset> are:

Hz, Vpp, V

Example

APPL:USER:CH2 1000,5.0,-1.5

16. APPLy:CH2?

Command

Format

APPLy:CH2?

Function

Query the current configuration of CH2 and the type of waves

outputted.

Explanations

The query returns a character string with double quotation marks,

including function, frequency, amplitude and offset.

Example

CH2:"SIN,1.000000e+03,5.000000e+00,-1.500000e+00"