Specifications

RIGOL DG10X2 Commands System
Programming Guide for DG10X2
2-6
Command
Format
APPLy?
Function
Query the current configuration of CH1 and the type of waves
outputted.
Explanations
The query returns a character string with double quotation marks,
including function, frequency, amplitude and offset.
Example
CH1:"SIN,1.000000e+03,5.000000e+00,-1.500000e+00"
9. APPLy:SINusoid:CH2
Command
Format
APPLy:SINusoid:CH2 [<frequency>[,<amplitude>[,<offset>]]]
Function
Generate a sine wave with specific frequency, amplitude and DC
offset via CH2.
Explanations
 If the parameters you set are less than three, the sequence
would be: <frequency>, <amplitude>, <offset>.
 The default units of <frequency>, <amplitude>, <offset> are:
Hz, Vpp, V
DC
.
Example
APPL:SIN:CH2 1000,5.0,-1
10. APPLy:SQUare:CH2
Command
Format
APPLy:SQUare:CH2 [<frequency>[,<amplitude>[,<offset>]]]
Function
Generate a square wave with specific frequency, amplitude and DC
offset via CH2 and cover the current duty cycle settings and select
50% automaticly.
Explanations
 If the parameters you set are less than three, the sequence
would be: <frequency>, <amplitude>, <offset>.
 The default units of <frequency>, <amplitude>, <offset> are:
Hz, Vpp, V
DC
.
Example
APPL:SQU:CH2 1000,5.0,-1
11. APPLy:RAMP:CH2
Command
Format
APPLy:RAMP:CH2 [<frequency>[,<amplitude>[,<offset>]]]
Function
Generate a ramp wave with specific frequency, amplitude and DC
offset via CH2 and cover the current symmetry settings and select
50% automaticly.