User manual

Chapter 2 Front Panel Operations RIGOL
DG1000Z Users Guide 2-105
IP Configuration Mode
IP configuration mode could be DHCP, AutoIP or ManualIP. If the network is
disconnected currently, there will be nothing to be displayed behind IP Configure:.
In different IP configuration modes, the configuration ways of network parameters
(such as IP address) are different.
1. DHCP
In DHCP mode, DHCP server in the current network assigns LAN
parameters, e.g. IP address, for the generator.
Press DHCP to select “On” or “Off” to turn DHCP mode on or off. The
default is On.
2. AutoIP
In AutoIP mode, the generator acquires IP address within 169.254.0.1 and
169.254.255.254 and subnet mask 255.255.0.0 automatically according to
the current network configuration.
Press AutoIP to select “On” or “Off” to turn AutoIP mode on or off. The
default is On. When DHCP and AutoIP modes are turned on at the same
time, the instrument will first use DHCP mode. Therefore, to enable this
mode, set DHCP as “Off”.
3. ManualIP
In ManualIP mode, the LAN parameters of the generator, e.g. IP address,
are defined by users.
Press ManualIP to select “On” or “Off” to turn ManualIP mode on or off.
The default is “Off. If all the three IP configuration modes are “On”, the
priority of parameters configuration from high to low is DHCP, AutoIP
and ManualIP. Therefore, to enable this mode, set DHCP and AutoIP as
“Off”.
The IP address format is nnn.nnn.nnn.nnn. The first nnn ranges from 1 to
223 (except 127) and the other three nnn range from 0 to 255. It is
recommended that users acquire an available IP address from their network
administrator.
Press IP Address and use the direction keys and numeric keyboard or
knob to enter your desired IP address. The setting is stored in non-volatile
memory and will be loaded automatically when the generator is powered on
the next time if DHCP and AutoIP are set as Off.
TIPS:
If all the three IP configuration modes are On, the priority of parameters
configuration from high to low is DHCP, AutoIPand ManualIP.
The three IP configuration modes cannot be set as Offat the same time.