Quick Start Guide

RIGOL
8 DG1000Z Quick Guide
—
The backlight goes on when this function is selected.
Output Burst waveform for Sine, Square, Ramp, Pulse and Arb
(except DC).
— 3 Burst types: NCycle, Infinite and Gated.
— Noise can also be used to generate gated burst waveform.
— 3 types of trigger sources: Internal, External and Manual.
— The backlight goes on when this function is selected.
Used to set the auxiliary function parameters and system
parameters. The backlight goes on when this function is
selected.
Store or recall the instrument state or the user-defined arbitrary
waveform data.
—
A nonvolatile memory (C disk) is built in and an USB storage
device (D disk) can be connected.
— The backlight goes on when this function is selected.
To get the help information of any front panel key or menu
softkey, press this key and then press the desired key.
Note:
1) When the instrument is working in remote mode, press this
key to return to local mode.
2) Used to lock or unlock the keyboard. Press and hold Help
to lock the front panel keys and at this point, the front panel
keys (except Help) are not available. Press and hold this
key again to unlock.
15. Menu Softkeys
Correspond to the menus at the left and pressing the softkey will activate the
corresponding menu.
16. LCD
3.5 inches TFT (320×240) color LCD display. The current settings and state of
the instrument can be clearly displayed. For detailed information, refer to “User
Interface”.