Instructions
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- DG1000Z Series Overview
- Document Overview
- Chapter 1 Quick Start
- Chapter 2 Front Panel Operations
- To Output Basic Waveform
- To Select Output Channel
- To Select Basic Waveform
- To Set Frequency/Period
- To Set Amplitude/High Level
- To Set Offset/Low Level
- To Set Start Phase
- Align Phase
- To Set Duty Cycle (Square)
- To Set Symmetry (Ramp)
- To Set Pulse Width/Duty Cycle (Pulse)
- To Set Leading/Trailing Edge Time (Pulse)
- To Enable Output
- Example: To Output Sine Waveform
- To Output Arbitrary Waveform
- To Output Harmonic
- Modulation
- Sweep
- Burst
- Counter
- Store and Recall
- Utility and System Settings
- To Install the Option
- To Lock the Keyboard
- To Output Basic Waveform
- Chapter 3 Remote Control
- Chapter 4 Troubleshooting
- Chapter 5 Specifications
- Chapter 6 Appendix
- Index
Chapter 1 Quick Start RIGOL
DG1000Z User’s Guide 1-19
To Use the Built-in Help System
DG1000Z built-in help system provides help information for each key and menu
softkey at the front panel. When operating the instrument, users can view the help
information of any key at any time.
1. Acquire the built-in help
Press Help and the backlight turns on. Then press the desired key or menu
softkey and the corresponding help information is displayed.
2. Page Up/Down
When the help information is displayed in multiple pages, users can acquire the
help information on the previous or next page using
(the previous
line)/
(the next line)/ (page up)/ (page down) or the knob.
3. Close the current help information
When help information is displayed in the interface, pressing
at the front
panel, the help information interface is closed and the interface before entering
the built-in help system is displayed.
4. Common help topics
Press Help twice to open the common help topics list. Use
/ / / or
the knob to select the desired help topic and press Select to view the
corresponding help information.