Instructions
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- DG1000Z Series Overview
- Document Overview
- Chapter 1 Quick Start
- Chapter 2 Front Panel Operations
- To Output Basic Waveform
- To Select Output Channel
- To Select Basic Waveform
- To Set Frequency/Period
- To Set Amplitude/High Level
- To Set Offset/Low Level
- To Set Start Phase
- Align Phase
- To Set Duty Cycle (Square)
- To Set Symmetry (Ramp)
- To Set Pulse Width/Duty Cycle (Pulse)
- To Set Leading/Trailing Edge Time (Pulse)
- To Enable Output
- Example: To Output Sine Waveform
- To Output Arbitrary Waveform
- To Output Harmonic
- Modulation
- Sweep
- Burst
- Counter
- Store and Recall
- Utility and System Settings
- To Install the Option
- To Lock the Keyboard
- To Output Basic Waveform
- Chapter 3 Remote Control
- Chapter 4 Troubleshooting
- Chapter 5 Specifications
- Chapter 6 Appendix
- Index
Chapter 1 Quick Start RIGOL
DG1000Z User’s Guide 1-5
Front Panel Overview
The front panel of DG1000Z is shown below. Click the numbers in the figure to view
the corresponding description.
16 15 14 13 12 11 10
1 2 3 4 5 6 7 8 9
Figure 1-1 Front Panel
1. Power Key
The power key is used to turn the generator on or off.
2. USB Host
Support FAT32 format Flash type USB storage device, RIGOL TMC digital
oscilloscope (DS), power amplifier (PA) and USB to GPIB interface converter
(Option).
USB storage device: read the waveform or state files saved in the USB
storage device or store the current instrument states or edited waveform
data into the USB storage device. In additional, the content displayed on
the screen also can be saved as a picture file (*.Bmp) into the USB storage
device.
TMC DS: seamlessly interconnect with the RIGOL DS that meets the TMC
standard. Read and store the waveform data collected by the DS and rebuilt
waveform losslessly.
PA (option): support the RIGOL power amplifier (such as PA1011). You
can configure it online and the signal is outputted after whose power is
amplified.
USB to GPIB interface converter (Option): expand the GPIB interface for
RIGOL instrument with USB Host interface but without GPIB interface.