Instructions
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- DG1000Z Series Overview
- Document Overview
- Chapter 1 Quick Start
- Chapter 2 Front Panel Operations
- To Output Basic Waveform
- To Select Output Channel
- To Select Basic Waveform
- To Set Frequency/Period
- To Set Amplitude/High Level
- To Set Offset/Low Level
- To Set Start Phase
- Align Phase
- To Set Duty Cycle (Square)
- To Set Symmetry (Ramp)
- To Set Pulse Width/Duty Cycle (Pulse)
- To Set Leading/Trailing Edge Time (Pulse)
- To Enable Output
- Example: To Output Sine Waveform
- To Output Arbitrary Waveform
- To Output Harmonic
- Modulation
- Sweep
- Burst
- Counter
- Store and Recall
- Utility and System Settings
- To Install the Option
- To Lock the Keyboard
- To Output Basic Waveform
- Chapter 3 Remote Control
- Chapter 4 Troubleshooting
- Chapter 5 Specifications
- Chapter 6 Appendix
- Index
RIGOL Chapter 2 Front Panel Operations
2-98 DG1000Z User’s Guide
UI Customization
Set Coordinate* (0,0)
System Set
Power On Setting
Default
Clock Source
Int
Decimal Point Dot
Thousand Separator Comma
Beeper On
Screen Saver
On
Brightness*
50%
Contrast
*
25%
Display Mode
*
Dual Channels Parameters
Language
*
Factory Delivery Setting
I/O Configuration
USB Device Type
Computer
GPIB
*
2
DHCP
*
On (default setting in LAN)
Auto IP* On (default setting in LAN)
Manual IP*
Off (default setting in LAN)