Instructions
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- DG1000Z Series Overview
- Document Overview
- Chapter 1 Quick Start
- Chapter 2 Front Panel Operations
- To Output Basic Waveform
- To Select Output Channel
- To Select Basic Waveform
- To Set Frequency/Period
- To Set Amplitude/High Level
- To Set Offset/Low Level
- To Set Start Phase
- Align Phase
- To Set Duty Cycle (Square)
- To Set Symmetry (Ramp)
- To Set Pulse Width/Duty Cycle (Pulse)
- To Set Leading/Trailing Edge Time (Pulse)
- To Enable Output
- Example: To Output Sine Waveform
- To Output Arbitrary Waveform
- To Output Harmonic
- Modulation
- Sweep
- Burst
- Counter
- Store and Recall
- Utility and System Settings
- To Install the Option
- To Lock the Keyboard
- To Output Basic Waveform
- Chapter 3 Remote Control
- Chapter 4 Troubleshooting
- Chapter 5 Specifications
- Chapter 6 Appendix
- Index
Chapter 2 Front Panel Operations RIGOL
DG1000Z User’s Guide 2-97
Trigger Input Leading
Delay 0ns
Interface Focus Items
Frequency/Period
Freq
Amplitude/High Level Ampl
Offset/Low Level Offset
Pulse Width/Duty Cycle Duty
Start/Center
Start
Stop/Span
Stop
Frequency Coupling Deviation/Ratio Ratio
Amplitude Coupling Deviation/Ratio Ratio
Phase Coupling Deviation/Ratio Ratio
Default Channel
CH1
Counter
Measurement Parameter Frequency
Gate Time 1ms
Statistic Function Off
Display Mode
Digital
Trigger Sensitivity
25%
Trigger Level
0V
Coupling Mode AC
High-frequency Suppression Off
System Parameter
Coupling Set
Frequency Coupling
Off
Frequency Deviation 0μHz
Frequency Ratio 1
Amplitude Coupling Off
Amplitude Deviation
0Vpp
Amplitude Ratio
1
Phase Coupling Off
Phase Deviation
0°
Phase Ratio 1
Track Off
Print Set
Print Switch
Off
Print Destination
Usb Disk
Print Format Bmp
Print Copies 0
Print Palette
Gray
Invert
On