Instructions

RIGOL Chapter 2 Front Panel Operations
2-78 DG1000Z User’s Guide
3. To Input Filename
Press IME to select “Chinese” or “English”. The length of the file or folder name
is limited within 9 characters.
 English Input (include number input):
Press +/- on the numeric keyboard at the front panel to switch between
uppercase and lowercase.
Use the knob to select the desired character from the virtual soft keyboard,
then press Select to select the character and the character selected would
be displayed in the “Filename Input Area”. Use the same method to input all
the characters needed. You can press Delete to delete the character at the
cursor currently in the “Filename Input Area”.
 Chinese Input:
Press +/- on the numeric keyboard at the front panel to switch to
lowercase.
Figure 2-19 Filename Input Area (Chinese)
Use the knob to select the desired character from the “virtual soft keyboard”,
then press Select to select the character and the character selected would
be displayed in the “Pinyin Input Area”. After inputting the pinyin of a
Chinese character, use the numeric keyboard to select the No. (in the
“Chinese Character Display Area”) of the desired Chinese character (if the
desired Chinese character is not currently displayed, use the direction key
to open the next page) and the Chinese character selected would be
displayed in the “Filename Input Area”. Use the same method to input all
Chinese characters needed. You can also press Delete to first delete the
Pinyin Input Area Filename Input Area
Chinese Character Display Area Virtual Soft Keyboard