User manual

RIGOL DG1022 Commands System
Programming Guide for DG1022
2-62
The detailed information of each command are:
1. MEMory:STATe:NAME
Command
Format
MEMory:STATe:NAME {0|1|2|3|4|5|6|7|8|9|10} [,<name>]
Function
Assign an user-defined name for specified memory location.
Example
MEM:STAT:NAME 1,A1
2. MEMory:STATe:NAME?
Command
Format
MEMory:STATe:NAME? {0|1|2|3|4|5|6|7|8|9|10}
Function
Query the name of specified memory location.
Return Value
The query returns the name of specified memory location such as
A1. If no name was assigned, the return is empty.
3. MEMory:STATe:DELete
Command
Format
MEMory:STATe:DELete {0|1|2|3|4|5|6|7|8|9|10}
Function
Delete the contents in specified memory location.
Example
MEM:STAT:DEL 1
4. MEMory:STATe:RECall:AUTO
Command
Format
MEMory:STATe:RECall:AUTO {OFF| ON}
Function
Disable or enable the automatic recall of the power-down state
from storage location “0” when power on. Select “ON” to
automatically recall power-down state when power on and select
“OFF” (default) to issue a reset.
Example
MEM:STAT:REC:AUTO OFF
5. MEMory:STATe:RECall:AUTO?
Command
Format
MEMory:STATe:RECall:AUTO?
Function
Query the recall state when power off.
Return Value
The query returns OFF or ON.
6. MEMory:STATe:VALid?