User manual

DG1022 Commands System RIGOL
Programming Guide for DG1022
2-61
MEMory
The generator has 10 storage locations in non-volatile memory (STATE1~ STATE10) to
store instrument states. The locations are numbered from 1 to 10. The generator
automatically uses location “0” to hold the state of the instrument when power down.
You can also assign a user-defined name to each of the locations (1 through 10) from
the front panel.
DG1022 supports following MEMory commands:
1. MEMory:STATe:NAME
2. MEMory:STATe:NAME?
3. MEMory:STATe:DELete
4. MEMory:STATe:RECall:AUTO
5. MEMory:STATe:RECall:AUTO?
6. MEMory:STATe:VALid?
7. MEMory:NSTates?