User manual

DG1022 Commands System RIGOL
Programming Guide for DG1022
2-35
AM
In AM, the amplitude of carrier is varies with the instantaneous voltage of the
modulation waveform. Among CH1, the generator can generate AM modulation waves.
In addition, AM commands could be used for these settings: modulation source,
modulation waveform, modulation frequency, modulation depth and AM modulation
state.
DG1022 supports following AM commands:
1. AM:SOURce
2. AM:SOURce?
3. AM:INTernal:FUNCtion
4. AM:INTernal:FUNCtion?
5. AM:INTernal:FREQuency
6. AM:INTernal:FREQuency?
7. AM:DEPTh
8. AM:DEPTh?
9. AM:STATe
10. AM:STATe?