User manual

RIGOL DG1022 Commands System
Programming Guide for DG1022
2-32
The detailed information of each command are:
1. PULSe:PERiod
Command
Format
PULSe:PERiod {<seconds>|MINimum|MAXimum}
Function
Set the period of pulse from CH1 in seconds.
Example
PULS:PER 0.01
2. PULSe:PERiod?
Command
Format
PULSe:PERiod? [MINimum|MAXimum]
Function
Query the period of pulse from CH1.
Return Value
The query returns the period of pulse in the form of scientific
notation and in seconds, such as: 1.000000e-02.
3. PULSe:WIDTh
Command
Format
PULSe:WIDTh {<seconds>|MINimum|MAXimum}
Function
Set the width of pulse for CH1 in seconds.
Example
PULS:WIDT 0.005
4. PULSe:WIDTh?
Command
Format
PULSe:WIDTh? [MINimum|MAXimum]
Function
Query the width of pulse from CH1.
Return Value
The qurey returns the width of pulse in the form of scientific
notation and in seconds, such as: 5.000000e-03.
5. PULSe:DCYCle
Command
Format
PULSe:DCYCle {<percent>|MINimum|MAXimum}
Function
Set the duty cycle of pulse for CH1.
Example
PULS:DCYC 50
6. PULSe:DCYCle?
Command
Format
PULSe:DCYCle? [MINimum|MAXimum]