User manual

RIGOL DG1022 Commands System
Programming Guide for DG1022
2-30
Command
Format
OUTPut:LOAD:CH2? [MINimum|MAXimum]
Function
Query the current load settings of CH2.
Return Value
The query returns the current load setting in ohms or returns
“Infinity”.
17. OUTPut:POLarity:CH2
Command
Format
OUTPut:POLarity:CH2 {NORMal|INVerted}
Function
Set the polarity of waveform from CH2.
Example
OUTP:POL:CH2 NORM
18. OUTPut:POLarity:CH2?
Command
Format
OUTPut:POLarity:CH2?
Function
Query the polarity of waveform from CH2.
Return Value
The query returns NORM or INV.