User manual

DG1022 Commands System RIGOL
Programming Guide for DG1022
2-21
The detailed information of each command are:
1. VOLTage
Command
Format
VOLTage {<amplitude>|MINimum|MAXimum}
Function
Set the amplitude from CH1 in Vpp.
Explanations
MIN selects the minimum amplitude. MAX selects the maximum
amplitude for the selected function.
Unit
VPP, VRMS or DBM. Note that DBM could be used only in non-high
resistance. The unit of voltage could be changed via sending
VOLTage:UNIT.
Example
VOLT MIN
2. VOLTage?
Command
Format
VOLTage?
Function
Query the amplitude from CH1.
Return Value
The query returns the amplitude that has been set in the form of
scientific notation such as: 4.000000e-03.
3. VOLTage:HIGH
Command
Format
VOLTage:HIGH {<voltage>|MINimum|MAXimum}
Function
Set the high level of waves from CH1 in V.
Explanations
<voltage>is the high level for user to set. MIN selects the
minimum high level. MAX selects the maximum high level.
Example
VOLT:HIGH MAX
4. VOLTage:HIGH?
Command
Format
VOLTage:HIGH?
Function
Query the high level of waves from CH1.
Return Value
The query returns the high level that has been set in the form of
scientific notation such as: 1.000000e+01.
5. VOLTage:LOW
Command
VOLTage:LOW {<voltage>|MINimum|MAXimum}