User manual

DG1022 Commands System RIGOL
Programming Guide for DG1022
2-3
APPLy
APPLy commands provide the most straightforward method to program the
generator over remote interface. Among following commands, the instrument could
set and output waveforms if OUTPUT function is enable.
DG1022 supports following APPLy commands:
1. APPLy:SINusoid
2. APPLy:SQUare
3. APPLy:RAMP
4. APPLy:PULSe
5. APPLy:NOISe
6. APPLy:DC
7. APPLy:USER
8. APPLy?
9. APPLy:SINusoid:CH2
10. APPLy:SQUare:CH2
11. APPLy:RAMP:CH2
12. APPLy:PULSe:CH2
13. APPLy:NOISe:CH2
14. APPLy:DC:CH2
15. APPLy:USER:CH2
16. APPLy:CH2?