Phau Ntawv Qhia

INSTALLATION INSTRUCTIONS

IMPORTANT

THANK YOU FOR PURCHASING RIGID INDUSTRIES’ PRODUCTS FOR YOUR VEHICLE.

Please read through all of these instructions and tips before proceeding with the installation.

We do our best to provide a simple installation process for all applications, however a

professional installation is always recommended.

Always disconnect any power sources connected to your vehicle before

servicing fuses or electrical systems.

Adapt-XP

PAGE 1
INSTALLATION INSTRUCTIONS Adapt-XP IMPORTANT THANK YOU FOR PURCHASING RIGID INDUSTRIES’ PRODUCTS FOR YOUR VEHICLE. Please read through all of these instructions and tips before proceeding with the installation. We do our best to provide a simple installation process for all applications, however a professional installation is always recommended. Always disconnect any power sources connected to your vehicle before servicing fuses or electrical systems.
PAGE 2
WIRING LEADS RED WIRE = ON MODE VOLTAGE BLACK WIRE = GROUND WHITE WIRE = ADAPT MODE VOLTAGE FUNCTIONALITY Congrats on your purchase of the world’s first autonomous off-road light pod from RIGID! The Adapt-XP series has been engineered to operate with a 3-way switch. There are 3 modes: On, Off, & Adapt. On Mode (red wire lead) will activate the entire light pod. The total available power from the vehicle will be distributed equally to all optic zones.
PAGE 3
ADAPT-XP ASSEMBLY DIAGRAM E F G A I H B D K J C A M8x25mm Carriage Bolt Place through bracket B M8 Flat Washer Place on carriage bolt C M8 Lock Washer Place on carriage bolt D M8 Nut Tighten bracket to mount E M6 Ny Lock Nut Place in heatsink F M4 Ny Lock Nut Place into mount bushing G Mounting Bushing Slide into heatsink H M6 Flat Washer Place on J prior to install I M4 Flat Washer Place on K prior to install J M6x22mm Socket Head Tighten bracket to the light (Torque 32in-