Phau Ntawv Qhia

RDS SR-SERIES PRO
Mounting your light bar: Assemble mounting hardware onto the light bar as shown in Figure 1. (The
mount bushings are designed to clip in, holding the bolts in place.) If using the short L-brackets,
it is recommended that you mark the location of your mounting holes using the assembly, drill the
mounting holes, then mount the light bar in its nal location, using hardware of your choice.
WIRING INSTRUCTIONS
IMPORTANT
Always disconnect any power sources connected to your vehicle before
servicing fuses or electrical systems.
Figure 1
Figure 2
Fuse
Relay
In-Cab Switch
To Battery
To Light Bar
Negative & Positive
Negative & Positive